// Navigation

VOR Navigation Simulator

Now fly it. Intercept a course, hold the needle centered against the wind, and detect station passage. Five missions with live coaching.

Chart

?

The chart is drawn in magnetic north, like the radials of a VOR. Drag the aircraft or the VOR station with mouse or finger.

The shaded halves show where the flag reads TO (orange) and FROM (cyan) for the course set in the OBS. The dashed line through the station is where the flag flips.

Keyboard (click the chart first): ← → heading 5° (Shift 1°), [ ] OBS 1° (Shift 10°), Space play or pause.

40 NM
Chart overlays

Instruments

?

Heading indicator: where the nose points. It has nothing to do with the VOR indication.

VOR / CDI: the OBS card sets the course. The needle shows where that course line is: needle right means the course is to your right. Each dot is 2°, full scale is 10°.

HSI: same information, but the card turns with your heading. Because the course arrow turns too, there is no reverse sensing. The HSI has 2 dots each side, 5° per dot.

Tip: drag sideways on the VOR instrument or use the mouse wheel to twist the OBS.

Heading
VOR / CDI
Radial---
To station---
Distance---
OBS---
Flag---
CDI---
Off course---
GS---
OBS (selected course)090°
Heading045°
While flying, the aircraft turns to this heading at standard rate (3° per second).
Airspeed and wind
True airspeed100 kt
Wind from270°
Wind speed0 kt
FCN 112.50

Training

Move things around and let the coach explain what the instruments are telling you. Everything updates live.

// Ground school

VOR in five steps

  1. 01
    Tune

    Set the VOR frequency (108.00 to 117.95 MHz) from the chart.

  2. 02
    Identify

    Listen to the Morse ident and compare it with the chart. No ident, no navigation.

  3. 03
    Twist

    Set the desired course in the OBS: the radial outbound, or the course to the station inbound.

  4. 04
    Read

    Check the flag first (TO or FROM), then the needle: it shows where the course line is.

  5. 05
    Fly

    Turn toward the needle to intercept, then hold the needle centered and correct for wind.

Heading does not matter

A VOR indicator only knows where you are and which course you selected. It does not know where your nose points. Turn the aircraft on the spot and nothing on the CDI moves.

Intercept and track

Needle deflected: turn toward it. Use 30° to 45° intercept, 90° when you are far off. As the needle starts to move, lead the turn onto the course.

On course with wind: find the heading that keeps the needle still. Bracket: if it drifts, correct 10°, then halve each further correction.

Reverse sensing and the HSI

If you fly roughly opposite to the course set in the OBS, the needle still shows the course correctly, but "needle right, turn right" now takes you away from it. That is reverse sensing.

Fix: always set the OBS to the course you actually fly. An HSI turns the course arrow with your heading, so the picture always matches the view out of the window.

Station passage

Above the station you fly through the cone of confusion: the needle swings and the flag may show OFF. Hold your heading, do not chase the needle.

Station passage is the first positive change from TO to FROM. Then set the outbound course and track it.

Reading the needle

The needle shows where the selected course line is, as seen when facing the course direction. Needle right, course right. One dot is 2°, full scale (5 dots) is 10° or more.

1 in 60 rule: at 60 NM, 1° off course is about 1 NM. At 30 NM one dot (2°) is about 1 NM, close to the station the same dot is only a few hundred metres.

Always identify

During maintenance a VOR may still transmit but with the ident removed (in the US it may send TST). Never navigate on a VOR you have not identified.

Quick reference

Frequencies108.00 to 117.95 MHz
CDI scale2° per dot, 10° full scale
Line of sight range≈ 1.23 × √height (ft) NM
Example3000 ft above station ≈ 67 NM
VOR check (US FAA, IFR only)Not required for EASA PPL VFR. US values: VOT and ground ±4°, airborne ±6°, dual ≤4°
Ident tone1020 Hz Morse
Next step Cross Fix & DME: find your position with two stations